MACKE PUMP >> PUMP LIST >> Chemical pump >> IH SERIES CHEMICRL PUMP

IH SERIES CHEMICRL PUMP

IH SERIES CHEMICRL PUMP

Features

Series IH chemical pump is radial split and back pull out structure, so there is no need of dismantling the pipeline when check and repair.
Pump casing is axial suction, radial discharge and supported by foot .Pump is connected with the driver by spacer coupling.
Bearing are lubricated by clean 22 mechanical oil, bearing housing must be filled with lubricant to about 2mm over the central line of oil level gauge before pump operation.
Shaft seal adopts packing seal, mechanical seal, vice-impeller seal (dynamic seal)

 

Applications

It is mainly used in oil, chemical industry, synthetic fiber, fertilizer, power plant, metallurgy, food and pharmaceutics, etc .industrial departments to transport corrosive medium without suspended grain or medium which must not be polluted.

 

Operating Conditions

Medium temp:-20℃ It can reach 180℃ if special measures are taken
Capacity:Q=3.4-460(m3/h)
Head=3.7-128(m)
Speed=1450-2900(r/min)
Rotation direction: clockwise rotation viewed from motor end.
In performance chart, power of shaft is calculated by specific gravity of medium as 1g/cm3,and viscosity as 1mm2/s.
Motor matching principle: if specific gravity ≤1.0,match motor according to 1.0;if 1﹤specific gravity ≤1.35,match motor according to 1.35;if 1.35﹤specific gravity ≤1.85,match motor according to 1.85

 

Designation

IH50-32-160
IH-Series product of internationa standard chemical pump
50-Suction diameter(mm)
32-Discharge diameter(mm)
160-Impeller nominal diameter(mm) 
 

IH SERIES CHEMICRL PUMP more